Usage higher than expected? A hidden leak is the most common cause. Before you start, check your bill’s usage and service dates, and think about anything that may have used extra water, like guests, washing vehicles, or pressure washing.
1Toilet test 10 min
- Put a few drops of food coloring in the toilet tank.
- Wait 10 minutes without flushing.
- Check the bowl. Repeat for each toilet.
Color in the bowl? You have a toilet leak, usually a worn flapper or fill valve. Fix it soon: high bills from toilet leaks are not eligible for a bill adjustment.
2Meter test 30 min
- Turn off all water inside and outside, including ice makers, sprinklers, and the washer.
- Find your meter, usually in a covered box near the street, and write down the reading.
- Use no water for 30 minutes, then check it again.
Reading changed? Water is moving with everything off, so you may have a leak in your pipes. Call a licensed plumber to find it.
Water coming up in your yard or the street? Call us right away at (502) 863-7816.
No leak found?
Your usage may have gone up for another reason, like watering or filling a pool. These checks can’t catch every leak, since some only happen when sprinklers run or an appliance cycles on. If your usage stays high, a licensed plumber or a GMWSS service worker can check for a hidden leak.
Small leaks add up
How much water a steady stream can waste:
74,000 gal
1/16 inch stream
298,000 gal
1/8 inch stream
666,000 gal
3/16 inch stream
1,181,500 gal
1/4 inch stream
Circles shown at approximately actual size.
Found and fixed a water line break? You may qualify for a bill adjustment.
