Backflow prevention
Keeping contaminants out of your drinking water
GMWSS holds high standards for the quality of water we deliver, but protecting our system is everyone’s responsibility. State regulations require all residential, commercial, and industrial customers to protect the public water system from contamination or pollution flowing back into the main water line. This is called backflow, and some customers may be required to install a device to prevent it.
Need a device tested?
Backflow prevention devices must be tested every year.
Find a testerCertified Backflow Prevention Testers
Submit resultsTest Report for Approved Backflow Preventers
QuestionsDeanna Lunsford, 502-863-7816backflow@gmwss.com
Understanding the basics
What is a cross connection?
A cross connection is any actual or physical connection between a potable (drinkable) water supply and any source of non-potable liquid, solid, or gas that could contaminate drinking water under certain circumstances.
What is backflow?
Backflow is the undesirable reverse flow of water or other substances into the treated drinking water distribution system. There are two types:
Backpressure happens when pressure in the downstream piping rises above the supply pressure, which can reverse the normal direction of flow.
Back-siphonage happens when a drop in system pressure creates a sub-atmospheric pressure in the water system.
Backflow incidents happen more often than you thinkA backflow incident can affect the water supply and create health hazards. Unprotected cross connections are prohibited, and everyone should help protect our water supply by following state and plumbing regulations.
Your responsibilities
The customer who signs up for water service is responsible for protecting the water supply from cross connections and maintaining their plumbing system properly.
That includes making sure unprotected cross connections are not created, and that the proper backflow prevention device is installed and tested annually.
GMWSS has a cross connection prevention program that every customer should follow. Backflow prevention devices are maintained by the customer and tested every year to make sure they are still working properly.
Simple ways to protect our water
- Know what a cross connection is so you can eliminate or isolate it.
- Maintain air gaps on water hoses and sinks.
- Be careful where you place a hose, and never leave it submerged.
- Use hose bib vacuum breakers on outside faucets, laundry room connections, and the connection at the house.
Where a device may be required
Here are a few of the places where a backflow prevention device should be installed.
- Irrigation systems
- Fire sprinkler systems
- Industrial and commercial properties
- Funeral homes
- Hospitals
- Restaurants
- Greenhouses
- Laundry facilities
- Car washes
- Swimming pools
- Automatic livestock waterers
- All farms, including homestead exempt
Documents and codes
Certified Backflow Prevention TestersList of testers certified to inspect backflow devices.
Backflow Test Report FormTest report for approved backflow preventers.
Backflow Device ExamplesCommon types of backflow prevention devices.
Cross Connection Prevention ManualGMWSS Manual for Containment and Cross Connection Prevention.
City of Georgetown Code of OrdinancesExcerpts on water service and the plumbing code.
Kentucky Plumbing Code Backflow HighlightsBackflow highlights from the 2017 Kentucky State Plumbing Law, Regulations, and Code Book.
Related sections of the City of Georgetown Code of Ordinances
- Chapter 19, Utilities: Article 4, Water
- Article V: Section 4, Plumbing Code
- Article V: Section 4-72, Adoption of State Plumbing Code
Questions about backflow?
Call Deanna Lunsford at 502-863-7816 or email backflow@gmwss.com.
